Thermo-mechanical properties of thermoset polymers and composites fabricated by frontal polymerization

M. Yourdkhani, B. Koohbor, C. Lamuta, L. M. Dean, P. Centellas, D. G. Ivanoff, I. D. Robertson, S. R. White, N. R. Sottos

Research output: Chapter in Book/Report/Conference proceedingChapter

3 Scopus citations

Abstract

Thermoset polymers are commonly used as the matrix material in fiber-reinforced polymer composites (FRPCs) due to their good mechanical properties, chemical stabilities, and ease of manufacturing. Conventional curing of thermosets and their composites requires heating the matrix monomers at elevated temperatures during long cure cycles for producing fully crosslinked polymers, resulting in high manufacturing cost in terms of time, energy, and capital investment. Frontal polymerization (FP) is a promising approach for rapid, energy-efficient fabrication of high-performance thermosets and FRPCs. In FP, a thermal stimulus (trigger) causes a self-propagating exothermic reaction wave that transforms liquid monomers to fully cured polymers, eliminating the need for external energy input by large ovens or autoclaves. We have used the FP of dicyclopentadiene (DCPD) to successfully fabricate thermoset polymers and composite parts. In this novel curing strategy, the final degree-of-cure of the polymer, and thereby its mechanical performance, is governed by the heat transfer phenomenon that occur at the polymerization front. During the fabrication of FRPCs some fraction of the generated heat is absorbed by continuous fibers or lost through the tooling. In this work, we will discuss the characterization of the thermo-mechanical properties of DCPD polymer manufactured by FP curing.

Original languageEnglish (US)
Title of host publicationConference Proceedings of the Society for Experimental Mechanics Series
PublisherSpringer New York LLC
Pages89-91
Number of pages3
DOIs
StatePublished - 2019
Externally publishedYes

Publication series

NameConference Proceedings of the Society for Experimental Mechanics Series
ISSN (Print)2191-5644
ISSN (Electronic)2191-5652

All Science Journal Classification (ASJC) codes

  • Engineering(all)
  • Computational Mechanics
  • Mechanical Engineering

Fingerprint

Dive into the research topics of 'Thermo-mechanical properties of thermoset polymers and composites fabricated by frontal polymerization'. Together they form a unique fingerprint.

Cite this