Mixed-Material Feedstocks for Cold Spray Additive Manufacturing of Metal-Polymer Composites

High-performance polymers such as poly(ether ether ketone) (PEEK) are appealing for a wide variety of industrial and medical applications due to their excellent mechanical properties. However, these applications are often limited by relatively low thermal stability and conductivity compared to metals. Many methods developed to metallize polymers, including vapor deposition and thermal spray processes, can lead to poor quality control, low deposition rate, and high cost. Thus, cold spray is a promising potential alternative to rapidly and inexpensively produce polymer-metal composites. In this study, we investigated the deposition characteristics of metal-polymer composite feedstock, composed of PEEK powder with varying volume fractions of copper (Cu) flake added, onto a PEEK substrate. We prepared the Cu-PEEK composite powder in varying compositions by two methods: hand-mixing the powders and cryogenically milling the powders. Scanning electron microscopy (SEM) of the feed mixtures shows that cryogenically milling the polymer and metal powders together created uniformly distributed micron-scale domains of Cu on PEEK particle surfaces, and vice versa, as well as consolidating much of the porous Cu flake. In low-pressure cold spray, the relatively large volume fractions of PEEK in the composite mixtures allowed for lower operating temperatures than those commonly used in PEEK metallization (300-500 °C). While the deposition efficiencies of each mixture were relatively similar in single-layer experiments, deposits formed after multiple passes showed significant changes in deposition efficiency and composition in PEEK-rich feedstock mixtures. SEM of deposit surfaces and cross-sections revealed multiple co-dominant mechanisms of deposition, which affect both the porosity and final composition of the deposit. Though present in all samples analyzed, the effects of cryogenic milling were more prevalent at lower Cu concentrations.